Pneumatic,Air source treatment,Cylinder,Solenoid Valve push button switches Power Pole Connectors circuit breakers,MCB,MCCB Electronic Watt-Hour Meter new products of Ningbo Electric Pneumatic
Ningbo electric Pneumatic About Us Product Catalog New Product BlogSite Map Contact US
Home>Meters>

D86 SERIES WATTHOUR METER

D86 SERIES WATTHOUR METER D86 SERIES WATTHOUR METER
Description:

The series D86 Watt-hour meter is the induction AC Matt-hour meter completer in specifications, stable in performance, accurate in metering, and wide in measurement range. Owing to the advanced design, the production design, the production and maintenance costs are reduced. The high-accuracy components assure the service life which is fault-for a long time. Each performance is in conformity to the requirements stipulated in lEC521standard.

D86 series three phase KWH meter is a kind of induction meter, used to measure active of reactive power in the net of three phase and 50Hz/60Hz. The connecting type consists of two kinds: direct operate type and operate with transformer. Three phase active energy meter accords with GB/T15283-94 and IEC521 ,
and three phase reactive energy meter accords with GB/T15282-94 and IEC145.

Main technical parameters:
1. Executive standard: The active matt-hour meter complies with the requirements of GB/T15283-94, while the reactive watt-hour meter complies with the requirements of GB/ T15282-94.
2. Specifications and main technical parameters:( See table 1 )
  • DT864-2/4 Type Imax < 40A Directly connected type;
  • DS862-4 Type Imax < 40A Directly connected type;
  • DX862-2/4 Type Imax < 40A Directly connected type;
  • DT862-4 Type Imax < 40A Directly connected type;
  • DS862-2/4 Type Imax < 40A Directly connected type;
  • DS862-4/2 Type Imax < 40A Directly connected type;
  • DX864-2/4 Type Imax < 40A Directly connected type;
  • DT862-4 Type Imax < 40A Directly connected type;
  • China Ningbo Electric Pneumatic Co.,Ltd (www.ningbo-electric.com), a manufacturer of industrial electric and pneumatic products in China, our factories group mainly supply and produce:
    SB PowerPole Connectors for battery, Circuit Breakers,MCB,MCCB,RCCB,MPCB,ELCB, Replays, Watt-hour Meters,XB2 series Pushbutton Switches, Pneumatics: air source treatment,pressure regulating filter ,atomizer lubricator,oil sprayer,two-point,three-point F.R.L combination,pressure regulating valve,filter regulator,SDA,CQ2B,CJ2B,CM2B thin type cylinder,MAL aluminum alloy mini,pneumatic cylinder,CXSM double,single acting cylinder,double acting,STMB,CX2 skid platform,solenoid valve,pneumatic magnetic valve,hand valve.
    Ningbo Electric Pneumatic:   Reliability from Science & Technology     
    Email: alexyfy@gmail.com MSN: pneumatic@live.com /, realwhks@hotmail.com
    Tel:+86-13505740443 Fax:+86-574-87722775
    All contents © 2007 Ningbo Electric & Pneumatic Co.,Ltd. All Rights Reserved

          China exporter,supplier of: XB2 LAY5 Push Button Switches, Single Phase Prepaid Electric Meters, MCB Mini Circuit Breakers Manufacturer, 175 Amp Power 2 Pole Connectors, MSQ Current Transformers, Pneumatic oil lubricators, Air Source Treatment Units, Air Pressure Regulators,Three-Point F.R.L Combinations, SDA Thin type Cylinders, MAL series Aluminum Alloy Mini Cylinders, 4V, 3V Series Solenoid Valve Manufacturer.